RCM-101 / RNC-101

£172.80£201.60 incl. VAT

Description

RCM-101

, 10 Button Lighting and Blind Control gives 4 scenes and off control, Dim Up + Down for lighting and Blinds Open + Close + Stop This panel is based on the 50 x 50mm Euro module, RCM units are modules only and always require a front plate kit.  Panels can either be surface mounted using the pattress, which gives a depth of 14mm, or flush mounted into a standard single gang UK back-box.  Rako’s single gang RVF (screw-fixing) front plate kits have surface mount options.  Double gang and RLF (screwless) options are for flush mounting only.  Wireless keypads are lithium battery powered with battery life calculated as being 3 years, based on pressing a button 30 times a day. Externally powered versions of the panels are available. RCM-101 10-Button wireless modular controller pre-configured with 4 scenes, off and master raise & lower control for lighting, open + close + stop blind control The RCM-100 wireless push button control module provides four scenes, off and master raise & lower and offers full scene programming. The panel has addressing switches on the back of the panel to setup rooms and houses. Setting two panels with the same addresses allows two way control within a room. As these panels are selecting scenes stored within the dimmers having more panels does not give more scenes. Panels can either be surface mounted using the patress, which gives a depth of 14mm, or flush mounted into a standard single gang UK back-box. RNC-101 Battery powered interface unit for up to 7 momentary volt-free switch inputs. The RNC100 wireless push button control module is programmable via NFC (Near Field Communication) using Rasoft Pro software and Rako’s RAMPI interface. The RNC070 has the capability for each button to be customised allowing triggers for single or multiple commands. Each input is fully customisable, can be addressed to separate Rako Rooms or Channels and activate on press, or release which gives a ‘Press and Hold’ function. RCM wireless control modules have a new ‘hard button’ design and are styled to match the WCM wired control panels. RCM units are modules only and always require a front plate kit either RVF (screw-fixing) or RLF (screwless). Single gang RVF front plate kits have surface mount options. Double gang and RLF options are for flush mounting only. The panel has addressing switches on the back of the panel to setup rooms and houses. Setting two panels with the same addresses allows two way control within a room. As these panels are selecting scenes stored within the dimmers having more panels does not give more scenes. Panels can either be surface mounted using the patress, which gives a depth of 14mm, or flush mounted into a standard single gang UK back-box. Panels are battery powered with battery life calculated as being 3 years, based on pressing a button 30 times a day. Externally powered versions of the panels are available.

Additional information

Weight 0.1 kg
Dimensions 0.86 × 0.86 × 0.05 mm
Wireless Option

RCM Standard Addressable, RNC NFC Configurable

Reviews

There are no reviews yet.

Be the first to review “RCM-101 / RNC-101”