Rako RAK4-L 4 Channel Leading-Edge Dimming Rack

£694.08 incl. VAT

4 Channel leading-edge dimming rack. For mains dimmable halogen or magnetic/wire-wound transformer lighting loads. Stackable with other RAK4 units. Stackable with other RAK4 units. Requires RAK-LINK for wired or RX-LINK for wireless systems.

Product Documents

Rako RAK-4L Installation Manual

Rako Rak-4L Data Sheet

100 in stock


Rako RAK-4L 4 x 5A Channel dimming rack leading edge WIRE-FREE CONTROL A four channel dimming rack, designed to be wall mounted in an electrical cupboard. Incorporating the latest dimming technology. The dimmer has four separate dimming channels that can control a total of 4800w/4000va of leading edge dimmable lighting loads. The Rako RAK-4L requires a seperate RF receiver (RxLink) which connects using standard CAT5 RJ45 sockets. Controlled from any Rako RAKOM RF device, for example the RCP07 or RCM070 push button RF wallplate. CENTRAL CONTROL The Rako RAK-4L dimmer units can be used as simple 4 channel packs or joined to form multi-way stacks. 8, 12 and 16 channels stacks can be formed. All communication is carried out using the RAKOM RF, particularly useful for reducing installation and cabling costs. The Rako RAK-4L units are designed to be centrally located in an electrical cupboard, utility room or garage. The RAK-4L leading edge dimmer can control up to 4800 watts of mains dimmable lighting loads. The hard fired Triac design provides control of a multitude of lighting loads. Microprocessor control combines smooth reliable dimming with dynamic safety features such as auto-resetting over current, temperature shutdown and voltage surge protection. The RAK-4L dimmer requires a seperate Rako RF receiver (RxLink), this unit connects using a single CAT5 RJ45 data bus. The RxLink receiver can be used to connect up to four RAK-4 dimmer units. The RAK-4L dimmer can be used seamlessley with other Rako modules, such as RDL in-line dimmers, RCP/RCM wallplates, RAH hand helds, bridge units and forms the foundation of any Rako scene-set system. Each RAK-4L box needs to be fed by a 20A Type B MCB. CALL FOR TRADE DISCOUNTS We are an approved distributor for Rako products so if you cannot see what you are looking for or you need any help selecting the right Rako products or anything else for your project then why not give us a call or send us an email and one of our team will be happy to help you out.

Additional information

Weight 3.5 kg
Dimensions 19.3 × 25.3 × 11.0 mm